Descripción
About this product
The Graphtec FCX2000 Series is a vacuum hold-down flatbed cutting plotter built for short-run die cutting, packaging prototyping, sign making, sandblast resist and industrial marking. A dual tool head carries two tools at the same time — a cutting blade plus a creasing / scoring tool or pen — so cutting and creasing run in a single job without swapping tooling.
ARMS (Advanced Registration Mark Sensing) reads registration marks automatically for accurate contour cutting on printed sheets, with four-point compensation for skew and distortion. Barcode print & cut lets an operator scan a printed job and load the matching cut data automatically, and offline USB operation means jobs can be run straight from a thumb drive with no computer attached.
Tool 1 delivers up to 500 gf of cutting force and Tool 2 up to 1 kgf, with cutting speeds to 400 mm/sec in all directions. The improved 20 mm vacuum hole spacing (versus 30 mm on earlier models) holds small parts and thin media flat through the cut.
Three cutting widths are available: FCX2000-60VC (24" x 36"), FCX2000-120VC (47.2" x 36") and FCX2000-180VC (70.8" x 36"). All models include Graphtec Studio 2 and Cutting Master 5 software and carry a 2-year warranty.
Please note: FCX2000 VC models require a vacuum pump kit (part 59000-050), sold separately.
Models & cutting area
| FCX2000-60VC | 24" x 36" (610 x 920 mm) effective cutting area |
| FCX2000-120VC | 47.2" x 36" (1,200 x 920 mm) effective cutting area |
| FCX2000-180VC | 70.8" x 36" (1,800 x 920 mm) effective cutting area |
| Mountable media (Y axis) | 37.4" (950 mm) on all models |
Specifications
| Brand | Graphtec |
| Type | Flatbed Cutter |
| Condition | New |
| Configuration | Digital servo system, flatbed |
| Media Hold-Down | Vacuum suction (vacuum pump kit 59000-050 required, sold separately) |
| Maximum Cutting Speed | 400 mm/sec all directions (1 to 40 cm/s, 16 steps) |
| Cutting Force - Tool 1 | Max. 4.9 N (500 gf), 40 steps |
| Cutting Force - Tool 2 | Max. 9.8 N (1 kgf), 40 steps |
| Number of Tools | Two (simultaneous cut and crease) |
| Tool Types | Supersteel cutting blade, oil-based pen, creasing / scoring tool |
| Minimum Character Size | Approx. 10 mm square (alphanumeric) |
| Programmable Resolution | GP-GL: 0.1 / 0.05 / 0.025 / 0.01 mm; HP-GL: 0.025 mm |
| Distance Accuracy | Max. 0.1% or 0.1 mm, whichever is larger |
| Perpendicularity | Max. 0.5 mm / 900 mm |
| Repeatability | Max. 0.1 mm |
| Registration Mark Sensing | ARMS with four-point axis / distance compensation |
| Control Panel | 3.7" graphic LCD with touchscreen and mechanical keys |
| Standard Interfaces | USB 2.0 (High-Speed), RS-232C, Ethernet 10BASE-T / 100BASE-TX |
| Buffer Memory | 2 MB |
| Command Sets | GP-GL and HP-GL emulation |
| Power Source | 100 to 240 VAC, 50/60 Hz (auto switching) |
| Power Consumption | Max. 140 VA |
| Vacuum Pump | 110 V: 1.5 hp / 220 V: 2.5 hp (sold separately) |
| Operating Environment | +10 to +35°C, 35 to 75% RH (non-condensing) |
| Dimensions (W × D × H) | FCX2000-60VC: 52.9" x 55.4" x 36.6" (1,344 x 1,409 x 930 mm) | FCX2000-120VC: 76.9" x 55.4" x 36.6" (1,934 x 1,409 x 930 mm) | FCX2000-180VC: 99.7" x 55.4" x 36.6" (2,534 x 1,409 x 930 mm) |
| Weight (with stand) | FCX2000-60VC: 167.5 lbs | FCX2000-120VC: 218.2 lbs | FCX2000-180VC: 225.7 lbs |
| Compatible OS | Windows 11 / 10 / 8.1 (64-bit), macOS |
| Included Software | Graphtec Studio 2, Cutting Master 5 |
| Safety / EMC Standards | UL60950-1 / cUL, CE (Low Voltage & EMC), FCC-A, EN55032-A |
| Warranty | 2 Years |
Supported media
Questions about fit or availability? Contact the Allprintheads team with your printer make, model and serial number and we'll confirm the correct SKU before you order.
