Print Head Doctor 14

Precio de venta$4,410.00 USD
When product is not in stock, usually the time to process is 5-7 days.

Retiro disponible en Main Office

Normalmente está listo en 2 horas


Print Head Doctor 14 is the ultimate recovery system for all kinds of solvent, eco-solvent, water-based and UV print heads. It's ideally suited for cleaning large print heads such as Kyocera KJ4B, or for cleaning multiple heads at once.

  • Weight
     27.0000 lbs
  • SKU

This print head cleaning machine model is a high-flow version of model 13. It's equipped with an "indestructible" Swiss-made KNF pumps: two pressure pumps rated at 85psi, and one vacuum pump. This machine has enough flow rate to clean up to 6 print heads at once. It can recover 2 Kyocera KJ4 print heads (300dpi or 600dpi).

Advantages of Print Head Doctor 14:

  • The high flow of 1200 ml/min at a high pressure of up to 25psi allows cleaning multiple heads at once.
  • Two main filters and 4 input filters. The vacuum pump is now protected by 2 filters.
  • The high pressure of 25 psi makes the reverse flushing very effective.
  • Complete control of the machine from Android devices.
  • Automatic pressure control with the digital pressure readout.
  • Fluid cooling with the temperature control.
  • Capable of doing forward, reverse and thru-head flushing of print heads, with or without Reverse Flushing Caps.
  • It has dedicated vacuum pumps that allow Vacuum-Assisted Forward Flushing using Sonic RF Caps, as well as the reverse flushing. The forward pressure can be reduced which makes the recovery process safer for the print heads, while more effective at the same time.
  • Digital pressure sensor for monitoring and controlling the print head pressure.
  • Two gauges for monitoring vacuum in the RF cap and in the first stage filters.
  • The new set of pumps provides sufficient flow even for print heads with a great number of nozzles and allows cleaning up to 6 heads simultaneously.
  • Fine-tuned recovery cycles accommodate various degrees of clogging, types of print heads and inks.
  • The new design allows ease of service of the main filter and the pumps because they are made as plug-in modules. It takes less than a minute to replace them and you don't need any tools.
  • First stage filters are conveniently located on the sidewall and can be replaced in seconds.
  • Dual first-stage filters and intake tubes for higher fluid flow rate and a longer period between changing filters.
  • Rugged housing with all components built-in.
  • Reliable electronic module with a digital indicator of the cycle number and remaining time in minutes.
  • All solvent-proof materials.



Gastos estimados de envío

You may also like

Recently viewed