New Ink Conversion for TrueVIS VG-640/540 and SG-540/300 Users
Three Important Notes on the Upgrade
Be sure to note the following issues when changing from TR/TE ink to TR2/TE2 ink.
- Output results with TR2/TE2 ink will be different from that with TR/TE ink.
TR/TE ink and TR2/TE2 ink cannot be used together. Ink combination cannot be changed. Only the same ink combination you are currently using is supported.
VG Series: CMYK CMYK, CMYKLcLmLk, CMYKLcLmLkWh
SG Series: CMYK
The printing speed of the VG/SG series combined with new TR2/TE2 ink is changed.
- Please be sure to check the details.
Various previous data settings on the RIP will need to be updated to meet the requirements of the upgraded VG-640/540 and SG-540/300. The settings from before the upgrade cannot be used because they do not support TR2/TE2 ink.
Be sure to prepare new TR2/TE2 ink (a full ink set), Cleaning Liquid Pouch for TR2 ink (1 set), and Manual Cleaning Liquid for TR2 ink (1 bottle) before upgrading. Unless you have these items readily available nearby, you will not be able to complete the upgrade.
Specifically manufactured to match the exact performance and color properties of Roland TrueVIS™ VG2 inks. This is an STS ultra premium Eco-Solvent ink with a stunning color gamut, performance, accurate color reproduction, and the ability to print on a wide range of media.
Our colors are a perfect match of the original and since it's so incredibly close to the original there's no need to change the color profile or flush the lines. It has virtually no scent and is Plug & Play just like the original. Environmental friendly, Water Resistant, Outdoor durability without lamination: similar to OEM, Wide color gamut, clean intense colors, Smooth tonal gradations, Excellent adhesion and compatibility with a wide range of coated and uncoated substrates.
|OEM Product Number||TR|
|STS Product Number||ROL.500.TV.C|
|Cartridge Capacity||500 mL|
|Ink Color||Cyan, Magenta, Yellow, Black, White, Light Black, Light Cyan, Light Magenta|
|Note||When changing from NON-OEM to STS ink each color should be flushed before putting in STS Ink bags. STS certifies that these inks will not cause damage to the printheads.|